Yamaha AX-397, AX-497 Remote control, Controlling this unit, Controlling other components

Remote control

This section describes the function of each control on the remote control used to control this unit or a YAMAHA CD player, tuner, tape deck, etc. with the remote control capability.

Note

Some components may not be controlled by this remote control.

			1
			POWER
			2
CD/DVD	PHONO	TUNER	STANDBY
			3
MD	TAPE	AUX	4

u+

PRESET VOLUME 5

d–

A/B/C/D/E

6

	A/B		DISPLAY
w	e	f	DISPLAY	7
DIR A		DIR B	REC
b	s	a	DISC

CD TAPE

p8

		CONTROLS AND FUNCTIONS
■	Controlling this unit
			INTRODUCTION
1	Infrared signal transmitter
Sends signals to this unit.
2	POWER
Turns on this unit.
Note

This button is operational only when POWER on the front panel is pressed inward to the ON position.

3STANDBY

Sets this unit to the standby mode.

Notes

•This button is operational only when POWER on the front panel is pressed inward to the ON position.

•In the standby mode, this unit consumes a small amount of power in order to receive infrared-signals from the remote control.

4Input selector buttons

Select the input source you want to listen to.

5VOLUME +/–

Controls the sound output level.

This does not affect the REC OUT level.

■Controlling other components

The functions of the buttons to control other YAMAHA components are the same as those of the corresponding buttons on those components. Refer to those components’ instruction manuals for details.

6Tuner buttons

Control various functions of the tuner.

PRESET +/–

Selects a preset station number (1 to 8).

A/B/C/D/E

Selects a preset station group (A to E).

7CD player / tape deck buttons

Control various functions of the CD player or the tape deck.

Notes

•DIR B and A/B apply only to the double cassette tape deck.

•Pressing DIR A will reverse the tape direction on the single cassette tape deck with the automatic reverse function.

8CD/TAPE selector switch

Switches to control either CD player functions or tape deck functions.

5