Yamaha CDR-HD 1500 owner manual 3 1, C o r d i n g 1 %

When a disc is selected:

0 0 3 1 “ 1	0 0 0	REC
L	–10 –6 –2 0	GROUP
dB –30		CDR
ALL SYNC ANLG R

When an album is selected:

0 0 3	1 “ 1	0 0 0	REC
ALBM	L	–10 –6 –2 0	GROUP
	dB –30		CDR
	ALL SYNC ANLG R

When a bookmark is selected:

M r k	1 “ 1	0 0 0	REC
	L	–10 –6 –2 0	GROUP
MARK	dB –30		CDR
	ALL SYNC ANLG R

4. Press w/d to start copying.

The progress of the copy process is shown in the display.

0 0 3 1 “ 1	0 0 1	REC
L	–10 –6 –2 0	GROUP
dB –30		CDR
ALL SYNC ANLG R

The unit applies the following settings (default) if the CDR copy menu settings (P.43) are never changed.

•Copy Method: “Digital Copy”

•Copy Level: 0dB

•Copy Speed: “Best Effort”

Memo

•The OPC (Optimum Power Control) feature may start automatically depending on disc conditions. In this case, the message “OPC Adjust” appears on the display until the adjustment is done (about 10 seconds) before the copy process starts.

•The progress of elapsed time for the track being copied may vary by the data processing inside this unit.

To cancel copying, press a.

COPYING FROM THE HDD ONTO A CD-R/CD-RW DISC

Notes

•If copying is canceled by pressing a, only the data that has been recorded on the CD-R or CD-RW disc before the cancellation remains on the disc. When “Digital Move” (P.43) is selected, the original data on the HDD that have already been copied to a CD-R or CD-RW disc will be deleted.

•CD TEXT is copied only when selecting “Full Auto” in the CDR copy mode for a new CD-R or CD-RW disc.

R e c o r d i n g 1 %				REC
	AUTO	L	0	GROUP
MARK		dB –30 –10 –6 –2		CDR
	SYNC ANLG R

•When the Audio Master Quality Recording is set or the message “Recording” appears on the display, you cannot cancel the copy process by pressing a.

When copying has been completed, the operation of the HDD and the CD automatically stops.

5. To carry out the finalization process (P.47), press

FINALIZE.

4

CD-R/CD -RW

COPYING

39

English