Adcom GFR-700 Remote Control Setup, Using Preprogrammed Commands, Programming Remote Commands

Chapter 3 - Setup

Remote Control Setup

The GFR-700 is a learning remote control that is ca- pable of storing and executing commands for all re- mote controls in your home theater system. In this way, you can eliminate the confusion of using mul- tiple remotes.

This section is divided into two main parts:
Using Preprogrammed Commands
The first section is an overview of the preprogrammed
commands for each source:
•	Main commands	39
•	Video 1~3 commands	39
• Video 4 commands (GDV-850)		40
•	CD commands (GCD-750)	40
•	Tuner commands	41
•	Rm 2 commands	41

Note: Main commands are not programmable, except for the four user macros (M1, M2, M3, and M4).

Programming Remote Commands
The second section includes instructions for pro-
gramming the remote for each source:
•	Programming commands	39
•	Deleting commands	40

•Deleting all commands for a

single component 41

•Deleting all commands for

	all components	41
•	Programming macro buttons	41
•	Deleting macro buttons	42
• Discrete remote control commands		42

Pressing a source button on the remote con- trol not only selects the input associated with that source...

...but it also remaps the remote control

buttons for that source.

42GFR-700 Owner’s Manual