Chapter 4 - Operations
Basic Audio/Video Playback
Follow these steps to play an audio/video source component connected to the Video 1, Video 2, Video 3, Video 4, or CD inputs.
Playing an AV Source Component
1Before you begin:
•Power on the
•Power on your Source component.
•Power on your TV or display device (If ap-
plicable).
2Select your input source.
•Press the desired Source selector button (Video 1, Video 2, Video 3, Video 4, or CD) on the
3Play your Source component.
•If you programmed the
•The output signal from your Source compo- nent will be heard through your speaker sys- tem and/or seen on your display device.
4Adjust the volume.
•Turn the Volume knob to adjust the volume from
Special Playback Features
During playback, choose from these special playback features:
•Mute - Press the Mute button to temporarily mute the audio.
•Dynamic Range - Press the D. Range button to compress the dynamic range of your audio out- put (aka, “night mode”).
•Theater EQ - Press the
•Surround modes - Press the Mode button to over- ride the default Surround mode and choose one of the many
•Sync - Press the Sync button and use the / buttons to delay the audio if the sound is out of sync with the picture.
External 7.1 Playback
If your source component is connected to the Ext 7.1 jacks, simply press the Ext 7.1 button on the remote control or front panel.
•To connect a source component to the Ext 7.1 inputs (usually DVD,
Tape Playback
If your source component is connected to the Tape input, press the Tape button on the remote control or front panel.
•To connect a source component to the Tape in- puts, see page 21.
Source |
| |
buttons | Mute | |
| ||
Ext7.1/ | Volume | |
Tape | ||
| ||
Play |
|
Mode
Sync
D. Range