Adcom Placing the GFR-700, About the Remote Control, Inserting the Remote Batteries, Welcome

Chapter 1 - Welcome

Placing the GFR-700

Place the GFR-700 on a stable, vibration-free surface away from moisture and out of direct sunlight. Your Adcom dealer will be pleased to show you many dif- ferent types of audio/video equipment racks and cabinets.

The GFR-700’s rear panel is the central connecting point for almost every component in your audio/ video system. Be sure to leave sufficient room be- hind the rear panel to accommodate cables, antenna leads, power cords, etc. We recommend a minimum of 5 inches of free space for maximum flexibility.

A distance of 1/2” should be maintained around the GFR-700 for ventilation. Keep your GFR-700 in a room where temperatures remain fairly moderate, and never cover it with table cloths, curtains, newspa- pers, etc., to avoid potential overheating.

About the Remote Control

The GFR-700 comes with a universal, programmable, backlit, ergonomic remote control that is ready for action in every sense of the word.

•For an overview of each remote button, see page 8.

•To program the remote, see page 42.

Inserting the Remote Batteries

1Remove the cover on the back panel of the re- mote control.

2Insert four AAA alkaline batteries, paying atten- tion to the correct polarities.

3Replace the cover.

6GFR-700 Owner’s Manual