American Power Conversion AP9207 manual Paging Setup Menu Definitions

Paging Setup Menu continued

Paging Setup

menu

definitions:

Table 11,

continued

Setting	Description
Event	A one-digit code that you associate with each of
	the events reportable by Share-UPS. If Paging
	is turned on and Share-UPS detects an event, it
	transmits the code to the pager. An event
	assigned 0 does not trigger paging and is thus
	not reported.
	You may assign the same digit to multiple
	events. (For example, you could assign 3 to all
	battery-related events.) However, it may pre-
	vent confusion to assign a unique code to each
	event.
	Each event is described below.
	UPS ON BATTERY– the UPS is providing bat-
	tery output due to a loss of utility power.
	ON & LOW BATTERY– the UPS is providing
	battery output due to a loss of utility power, and
	the UPS battery is nearly exhausted.
	UPS SHUT DOWN– the UPS has been shut
	down by command or a low-battery condition.
	UPS ON-LINE– the UPS has returned to
	online operation after an on-battery, low-bat-
	tery, or shutdown condition.
	REPLACE BATTERY– the UPS has issued a
	Replace Battery alarm.
	UPS FAULT– the UPS has detected an internal
	fault.
	ENV-ALARM– a Measure-UPS device has
	issued an alarm (temperature or humidity read-
	ing outside established limits, or contact clo-
	sure).

46