Lexmark 34S0300, 34S0100 Universal Setup menu, Units of Measure, Portrait Width, Portrait Height

Universal Setup menu

These menu items are used to specify the height, width, and feed direction of the Universal Paper Size. The Universal Paper Size is a user-defined paper size. It is listed with the other paper size settings and includes similar options, such as support for duplex printing and printing multiple pages on one sheet.

Menu item

Units of Measure

Inches

Millimeters

Portrait Width

3–14.17 inches 76–360 mm

Portrait Height

3–14.17 inches 76–360 mm

Feed Direction

Short Edge

Long Edge

Description

Identifies the units of measure

Notes:

•Inches is the US factory default setting.

•Millimeters is the international factory default setting.

Sets the portrait width

Notes:

•If the width exceeds the maximum, then the printer uses the maximum width allowed.

•8.5 inches is the US factory default setting. Inches can be increased in 0.01-inch increments.

•216 mm is the international factory default setting. Millimeters can be increased in 1-mm increments.

Sets the portrait height

Notes:

•If the height exceeds the maximum, then the printer uses the maximum height allowed.

•14 inches is the US factory default setting. Inches can be increased in 0.01-inch increments.

•356 mm is the international factory default setting. Millimeters can be increased in 1-mm increments.

Specifies the feed direction

Notes:

•Short Edge is the factory default setting.

•Long Edge appears only if the longest edge is shorter than the maximum length supported in the tray.

Understanding printer menus

74