Lexmark 34S0300, 34S0100, 34S0305, 34S5164 manual Understanding printer menus, Menu item, Description

Menu item

Symbol Set

<x>

PCL Emulation Settings

Point Size 1.00–1008.00

PCL Emulation Settings

Pitch 0.08–100

PCL Emulation Settings

Orientation

Portrait

Landscape

PCL Emulation Settings

Lines per Page 1–255 60 64

PCL Emulation Settings

A4 Width

198mm

203mm

PCL Emulation Settings

Auto CR after LF

Off

On

Description

Specifies the font ID and font name that compose each symbol set

Notes:

•10U PC-8 is the US factory default setting.

•12U PC-850 is the international factory default setting.

Changes the point size for scalable typographic fonts

Notes:

•12 is the factory default setting.

•Point Size refers to the height of the characters in the font. One point equals approximately 1/72 of an inch.

•Point sizes can be increased or decreased in 0.25-point increments.

Specifies the font pitch for scalable monospaced fonts

Notes:

•10 is the factory default setting.

•Pitch refers to the number of fixed-space characters per inch (cpi).

•Pitch can be increased or decreased in 0.01-cpi increments.

•For nonscalable monospaced fonts, the pitch appears on the display but cannot be changed.

Specifies the orientation of text and graphics on the page

Notes:

•Portrait is the factory default setting.

•Portrait prints text and graphics parallel to the short edge of the page.

•Landscape prints text and graphics parallel to the long edge of the page.

Specifies the number of lines that print on each page

Notes:

•60 is the US factory default setting. 64 is the international factory default setting.

•The printer sets the amount of space between each line based on the Lines per Page, Paper Size, and Orientation settings. Select the desired Paper Size and Orientation before setting Lines per Page.

Sets the printer to print on A4-size paper

Notes:

•198 mm is the factory default setting.

•The 203-mm setting sets the width of the page to allow the printing of eighty 10-pitch characters.

Specifies whether the printer automatically performs a carriage return (CR) after a line feed (LF) control command

Note: Off is the factory default setting.

Understanding printer menus

82