American Power Conversion AP9207 manual Paging Setup menu, Setting Description

Paging Setup Menu continued

Paging Setup	The following table describes the items that appear on the
menu	Paging Setup menu.
definitions:
Table 11	Setting	Description
	Paging	Turns paging on or off.
	Dial String	A string of up to 40 characters (letters, numbers,
		or punctuation) that Share-UPS sends to the
		modem in order to contact your pager. The Dial
		String must contain the following items.
		• The dial t ype command (DT or DP) at the
		beginning of the string
		• The phone number of the pager
		• An y modem commands needed for timing,
		waiting for dial tone, outside line access,
		pager PIN number, etc.
		For an example of a dial string, see “Share-UPS
		modem command string: Figure 9,” on page 42.
	Site ID	A string of up to 8 numeric (0 – 9) characters that
		will allow you to determine which Share-UPS
		unit is paging you during an event.
	Space Char	The character that Share-UPS uses to separate the
		Site ID from the Event Code. This character
		appears as a space on the pager. Change this set-
		ting only if your pager requires a different space
		character.
		Continued on next page

45