American Power Conversion AP9207 manual If the LED Is… Then Share-UPS… Labeled…

Product Description continued

LEDs:The Share-UPS LEDs provide important information con-

Table 2cerning operation of the unit. Refer to the table below for a description of the conditions indicated by the LED.

IF the LED	is…	THEN Share-UPS…
labeled…
Power	on	is powered on.
	flashing	is not working properly.
	on	has established communication
		with the UPS.
Status	off	has lost (or has not established)
		communication with the UPS.
	flashing	failed the self-test.
		is detecting an On Battery condition
	on	in the UPS (unless the UPS is on bat-
		tery during a self-test or is perform-
On Batt
		ing a run time calibration).
	off	is not detecting an On Battery con-
		dition in the UPS.
	on	is detecting a Low Battery condi-
		tion in the UPS.
Lo Batt
	off	is not detecting a Low Battery con-
		dition in the UPS.

Configuration The Share-UPS Configuration DIP switches control the

DIP switches shutdown operation of the unit. See “Configuring Share- UPS” on page 23.

Continued on next page

8