American Power Conversion AP9207 manual UPS Status Display Definitions

UPS Status Display continued

UPS Status

display

definitions:

Table 7,

continued

Item	Description
Run Time	An estimate of the total run time currently
	available from the UPS, based on present load
	and battery, in minutes.
Load Power	The amount of power being drawn by the load,
	in volt-amps (if supported by the UPS).
Load Current	The amount of current being drawn by the
	load, in amps (if supported by the UPS).
UPS Temp	The current temperature inside the UPS, in
	degrees Celsius.
Freq	The output frequency setting of the UPS, in
	hertz.
Voltage	The total voltage for the UPS batteries, in volts
	DC.
Capacity	The batteries’ charge as a percentage of capac-
	ity.
Smart Cells	The number of SmartCell battery packs con-
	nected to the UPS. (Not supported by all UPS
	models.)
Bad Cells	The number of connected SmartCell battery
	packs that are bad. (Not supported by all UPS
	models.)
Batt Date	The date of the last battery change, settable
	through PowerChute plus.
Self Test	The results of the latest UPS self-test, dis-
	played as one of the following:
	OK– Good batter y
	BT– Batter y failed; insufficient capacity
	NG– Invalid test because of overload
	NO– Test results not available

Continued on next page

36