American Power Conversion AP9207 Following list shows some of the features of Share, Menus, on

Introduction	continued
Features of	The following list shows some of the features of Share-
Share-UPS	UPS. Your Share-UPS unit…
	• Can be used as a freestanding desktop unit or
	mounted on a wall, in an APC NetShelter enclosure,
	or other 19" rack.
	• Works well in a heterogeneous network. Servers run-
	ning different operating systems can monitor the
	same UPS simultaneously.
	• Supports advanced or simple signaling on its
	Advanced port.
	• Can delay shutdown of the UPS until all servers have
	shut down gracefully.
	• Can be connected to a modem or terminal for sending
	and receiving status and control information between
	the UPS and Share-UPS. See “Using the Share-UPS
	Menus,” on page 29.
	• Allows you to restart hung servers.
	• Has operating modes that cause the UPS to shut down
	after confirmation from all protected devices or after
	an interval set by the user. See “Configuring Share-
	UPS” on page 23.
	• Does not depend on the operation of the network to
	protect connected devices. As a hard-wired acces-
	sory, Share-UPS reliably conveys important status
	messages during poor power conditions.
	Continued on next page

2