American Power Conversion AP9207 manual Share-UPS Settings menu Definitions

Share-UPS Settings Menu continued

Share-UPS

Settings menu

definitions:

Table 9,

continued

Baud rate	Transfer rate to be used for Share-UPS
	communications (0 = 1200, 1 = 2400, 2 =
	9600, 3 = 19200). The change takes effect
	when you quit the session.
Password	The password to use when logging onto
	the Share-UPS Main menu. The factory
	default is APC (upper case).
	The password may be up to eight printable
	characters, and is case-sensitive.
	Write down the password and keep it in a
	secure place. If you forget your password,
	contact APC by one of the means listed on
	the back cover of this manual.
Answer	The number of rings after which Share-
	UPS answers a call. The range is 0 (no
	answering) through 9.
Location	A character string describing the physical
	location of the Share-UPS unit.
Soft Timer	A value from 0-99 minutes for the Soft
	Timer duration (see “Soft timer,” on page
	27).
Shutdown Mode	The current setting for the shutdown
	mode, based on the configuration DIP
	switch settings of Share-UPS.
Reset Share-	Clears any changes you have made,
UPS Default	returning all device settings to their fac-
Settings	tory defaults. Share-UPS will prompt you
	to confirm this command.

41