American Power Conversion AP9207 manual If you want to change Share-UPS settings Com

Configuring Share-UPScontinued

Soft timer	The soft timer allows you to set a custom duration for the
	timer, from 0 to 99 minutes. One of the DIP switch settings
	in Timer shutdown mode enables the soft timer, whose
	default is 60 minutes. To change the soft timer duration, use
	the Share-UPS Settings menu. See “Share-UPS Settings
	menu: Figure 8,” on page 40.
Completing the	After you set the DIP switches, perform the following steps
configuration	in the order given.
	1 If you want to change Share-UPS settings: Com-
	plete the configuration of Share-UPS by accessing
	the Share-UPS Settings menu. For information on
	how to connect to the Share-UPS menu system,
	see “Using the Management Port” on page 29.
	2 If configuring multiple Share-UPS units: repeat
	step 2 for each unit, if applicable. You must con-
	figure each Share-UPS unit identically.
	3 Test the configuration. See “Testing Share-UPS,”
	on page 28.
	Continued on next page

27