American Power Conversion AP9207 manual UPS Status Display, Description

UPS Status Display

Menu	The UPS Status display provides factory information on the
description	connected UPS, output and load readings, battery informa-
	tion, and Measure-UPS accessory readings (if attached). To
	access the UPS Status display, type s from the Main menu.
UPS Status	The following figure shows the UPS Status display.

display: Figure 6

-------------------------		MATRIX 5000 -----------------------
Utility Line:	213.1	VAC	Battery Info
UPS Output:	248.7	VAC	-----------------------
UPS Load:	013.0	%	Voltage:	55.62 VDC
Run Time:	0113 min		Capacity:	100.0 %
Load Power:	015.4	VA	Smart Cells:	002
Load Current:	04.26	A	Bad Cells:	000
UPS Temp:	024.3	C	Batt Date:	04/28/97
Freq:	60.00	Hz	Self Test:	NO
UPS ID:	UPS_IDEN		Manuf Date:	04/28/97
UPS S/N:	80033718		F/W Rev:	5ZI

Status: On-Line

>

UPS Status display definitions: Table 7

The following table describes the items that appear on the UPS Status display.

Item	Description
Utility Line	The input voltage from the utility, in volts AC.
UPS Output	The output voltage to the load from the UPS,
	in volts AC.
UPS Load	The connected load (in watts) as a percentage
	of the rated capacity of the UPS.

Continued on next page

35