American Power Conversion AP9207 manual Waiting to Power Load

UPS Status Display continued

UPS Status

display

definitions:

Table 7,

continued

Item	Description
UPS ID	The internal identifier for the UPS, settable
	through PowerChute plus.
Manuf Date	The date the UPS was manufactured.
UPS S/N	The UPS electronic serial number, pro-
	grammed at the factory.
F/W Rev	The revision number of the UPS firmware.
Status	The current status of the UPS, displayed as
	one or more of the following.
	Waiting to Power Load
	In Bypass
	On-Line
	On-Battery
	Replace Battery
	Low Battery
	Abnormal Condition (see Fault
	item below)
Fault	The current abnormal conditions, when Status
	= Abnormal Condition. Some abnormal con-
	ditions are:
	Low Batt Shutdown
	Overload
	Main Relay– main rela y failure
	Batt Charger– batter y charger failure
	Bypass Relay– b ypass relay failure
	Internal Temp– internal tem perature too
	high
	Elec Fan Unit– electronics unit fan fail-
	ure
	Iso Unit Fan– isolation unit fan failure
	Bypass Supply– b ypass supply failure
	Voltage Select– volta ge selection fail-
	ure
	DC Imbalance

37