Yamaha CDR200t Parity ON, Parity OFF, Terminator ON, Terminator OFF, ♦Parity setting, ♦Terminator setting, Normally, use this setting

Chapter 2 - Installing the Yamaha CDR200t Drive

♦Parity setting

Parity ON (with a jumper)

— Parity Check will be performed. Normally, use this setting.

Parity OFF (without a jumper)

— Parity Check will not be performed.

Parity ON			Parity OFF
		ID SELECT			ID SELECT
		PARITY			PARITY
		TERMINATOR			TERMINATOR
	1 2 4	BLOCK SIZE		1 2 4	BLOCK SIZE

♦Terminator setting

The terminator setting indicates whether or not this device is the last connected SCSI device.

Terminator ON (with a jumper)

—Use this setting if the CDR200t is the last device in the internal SCSI daisy-chain.

Terminator OFF (without a jumper)

—Use this setting if devices other than the CDR200t are in the inter- nal SCSI daisy-chain and the CDR200t is not the last device.

Terminator ON			Terminator OFF
		ID SELECT			ID SELECT
		PARITY			PARITY
		TERMINATOR			TERMINATOR
	1 2 4	BLOCK SIZE		1 2 4	BLOCK SIZE

7