Yamaha CDR200t Loading a Disc

Chapter 3 - Operation

1.Press the eject button to open the tray.

2.Carefully place the disc, label-side up, on the disc tray.

3.Press the disc tray softly or press the eject button again to close the disc tray.

Recordable

VOL

READWRITE 62

Contents

Page COMPLIANCE INFORMATION STATEMENT FCC INFORMATION (U.S.A.) Page Page Important Precautions Table of Contents Introduction Chapter 1 - System Configuration Chapter 2 - Installing the Yamaha CDR200t Drive Chapter 3 - Operation Introduction CDR200t Features Orange Book Compatible Recording Chapter 1 - System Conﬁguration For an IBM-PCcomputer with DOS or Windows For a Macintosh computer About Discs Chapter 2 - Installing the Yamaha CDR200t Drive CDR200t drive settings ♦SCSI ID settings ♦Parity setting Parity ON Normally, use this setting Parity OFF ♦Terminator setting Cable Connection Audio output cable Make sure that the projection of the connector is facing upward DC power cable Make sure that the notch on the connector is facing upward Chapter 3 - Operation Front Panel Loading a Disc Ejecting the Disc Troubleshooting Speciﬁcations Front Panel Indicator Key