Manuals / Brands / Home Audio / CD Player / Yamaha / Home Audio / CD Player

Yamaha CDR200t Ejecting the Disc, Note:, Caution:, If the CDR200t is powered on:, If the CDR200t is not powered on:

1 22

Download 22 pages, 235.53 Kb

Chapter 3 - Operation

Ejecting the Disc

If the CDR200t is powered on:

Press the eject button to eject the disc.

Note: You cannot eject the disc if the SCSI command prohibits the eject operation while the CDR200t is reading data.

Caution: Be sure to remove the disc after it is completely ejected. (Trying to remove the disc before it is completely ejected may cause the drive to malfunction.)

Press the eject button

	READ/
ON/	WRITE
DISC

Recordable

VOL

READWRITE 62

If the CDR200t is not powered on:

Pressing the eject button will not eject the disc.

Contents

Page COMPLIANCE INFORMATION STATEMENT FCC INFORMATION (U.S.A.) Page Page Important Precautions Table of Contents Introduction Chapter 1 - System Configuration Chapter 2 - Installing the Yamaha CDR200t Drive Chapter 3 - Operation Introduction CDR200t Features Orange Book Compatible Recording Chapter 1 - System Conﬁguration For an IBM-PCcomputer with DOS or Windows For a Macintosh computer About Discs Chapter 2 - Installing the Yamaha CDR200t Drive CDR200t drive settings ♦SCSI ID settings ♦Parity setting Parity ON Normally, use this setting Parity OFF ♦Terminator setting Cable Connection Audio output cable Make sure that the projection of the connector is facing upward DC power cable Make sure that the notch on the connector is facing upward Chapter 3 - Operation Front Panel Loading a Disc Ejecting the Disc Troubleshooting Speciﬁcations Front Panel Indicator Key