Yamaha CDR200t DC power cable, Audio output cable, Make sure that the notch on the connector is facing upward

Chapter 2 - Installing the Yamaha CDR200t Drive

Audio output cable

Connect an audio output cable to the AUDIO OUT connector in the lower left corner of the rear panel.

Make sure that the projection of the connector is facing upward.

							DC	INPUT
								G	+12V
							+5V
					. NO	.
				SER			1
			ID SELECT
							CONNECTOR
			PARITY
			TERMINATOR	INTERFACE
			SIZE
OUT			BLOCK SCSI
		1 2	4
AUDIO
	L
R G

DC power cable

Connect a DC power cable to the DC INPUT connector on the lower right corner of the rear panel.

Make sure that the notch on the connector is facing upward.

							DC	INPUT
								G	+12V
							+5V
					. NO	.
				SER			1
			ID SELECT
							CONNECTOR
			PARITY
			TERMINATOR	INTERFACE
			SIZE
OUT			BLOCK SCSI
AUDIO		1 2	4
	L
R G

9