27
CLP-880/860/840/820/820S
The Function Mode
The [FUNCTION] button provides access to a range of functions that give the
Clavinova extraordinary versatility. The functions are categorized in groups as
follows:
CLP-840/
CLP-880/
820/820S 860
F1 F1 Tuning............................................................. 28
F2 F2 Scale ............................................................... 28
F3 F3 Dual Mode Functions .................................... 29
–F4 Split Mode Functions .................................... 30
F4 –Left Pedal Mode ............................................. 32
–F5 Pedal Functions............................................. 32
F5 F6 Metronome Volume........................................ 33
F6 F7 Piano Song Part Cancel Volume.................. 33
F7 F8 MIDI Functions............................................... 34
F8 F9 Backup Functions.......................................... 37
To Select a Function …...........................................................................
ZPress the [FUNCTION] button so that its indicator lights.
NOTE
•Functions cannot be selected during demo/piano song playback or when
the recorder is in operation.
XUse the FUNCTION [<] and [>] buttons to select the desired
function: F1 through F8 on the CLP-840/820/820S; F1 through F9
on the CLP-880/860.
CIn the case of the Scale (F2), Dual Mode (F3), Split Mode (F4:
CLP-880/860), Pedal Functions (F5: CLP-880/860), MIDI (F7:
CLP-840/820/820S, F8: CLP-880/860), and Backup (F8: CLP-840/
820/820S, F9: CLP-880/860) functions, you will have to press the
[+/YES] button once to enter the respective sub-mode after the
function has been selected, and then use the FUNCTION [<] and
[>] buttons again to select the desired sub-function.
NOTE
•The Dual or Split (CLP-880/860) mode must be engaged before the F3
and F4 functions can be selected, respectively. If the corresponding mode
is not engaged, “
F3.-
” or “
F4.-
” will appear on the display and the
corresponding sub-mode will not be available.
•The Dual mode can be engaged while in the Function mode, but the
Function mode must be exited before the Split mode (CLP-880/860) can
be engaged.
VSet the function as required by using the [–/NO] and [+/YES]
buttons (see the individual function descriptions, below).
NOTE
•After selecting the function, the current setting will be displayed when the
[–/NO] or [+/YES] button is pressed for the first time.
BPress the [FUNCTION] button so that its indicator goes out to exit
from the function mode.
● Operation Example
(sub-mode)
Press [+/YES]
Use FUNCTION [<], [>]
Use [–/NO], [+/YES]
Press [–/NO] or [+/YES]
once
FUNCTION
TEMPO
FUNCTION