31
CLP-880/860/840/820/820S
F4.3: Right Voice Octave Shift......................................................................................................
F4.4: Left Voice Octave Shift..........................................................................................................
Depending on which voices you combine using the split mode, the combination may sound
better if one of the voices is shifted up or down an octave. Use the [–/NO] and [+/YES]
buttons to set the octave of the Left or Right Voice as required. The available settings are “0”
for normal pitch, “–1” to shift the pitch down one octave, and “1” to shift the pitch up one
octave. Press the [–/NO] and [+/YES] buttons simultaneously to recall the default setting
(different for each voice combination).
Set according to the pitch extent for the song you want to play.
F4.5: Right Voice Effect Depth......................................................................................................
F4.6: Left Voice Effect Depth..........................................................................................................
These functions make it possible to individually set the depth of the effect for the Left and
Right split-mode Voices. Use the [–/NO] and [+/YES] buttons to set the effect depth for the
corresponding voice as required. The depth range is from 0 through 20. A setting of “0”
produces no effect, while a setting of “20” produces maximum effect depth. Press the [–/NO]
and [+/YES] buttons simultaneously to recall the default setting (different for each voice
combination).
NOTE
The effect depth settings cannot be changed unless the EFFECT is ON. The Function mode must be
exited before EFFECT can be turned ON.
F4.7: Damper Range................................................................................................................................
The Damper Range function determines whether the damper pedal affects the Right Voice,
the Left Voice, or both the Left and Right Voices in the split mode. Use the [–/NO] and [+/
YES] buttons to select “2” for the Left Voice, “1” for the Right Voice, or “ALL” for both
voices. Press the [–/NO] and [+/YES] buttons simultaneously to recall the default setting
“ALL”.
F4.8: Reset .........................................................................................................................................................
This function resets all split-mode functions to their default values. Press the [+/YES]
button to reset the values. “End” will appear on the display when all functions have been
reset.
The Function Mode