9
CLP-880/860/840/820/820S
Key Cover & Music Stand

To raise the music stand:

ZPull the stand up and toward yourself as far as it will go.
XFlip down the two metal supports at the left and the right on the rear
of the music stand.
CLower the music stand so that it rests on the metal supports.
As shown in the illustration, the angle of the music stand can be set in one
of three positions, according to the position of the metal supports. Set the left
and right metal supports to the same position.

To lower the music stand:

ZPull the music stand toward yourself as far as it will go.
XRaise the two metal supports (at the rear of the stand).
CGently lower the music stand backward until it is all the way down.
•Do not try to use the music stand in a half-raised position.
When lowering the stand, do not release your hands from the music stand
until it is all the way down.
Music Stand