Yamaha CRW2100SX Setup Procedures, Serial Number, SCSI Settings, Serial No

Setup Procedures

Serial Number

Once you have taken the CRW2100SX drive out of its packaging, you should immediately note down the serial number found at the rear of the drive under the bar code. You may need to refer to this number when requesting Customer Support services. In the box below the following diagram, write down the 10- character serial number (consisting of 3 letters followed by 7 digits).

Serial number

(3 letters and 7 digits)

Serial No.

SCSI Settings

Before connecting your CRW2100SX drive to your computer, you need to set up the drive using the switches located at the rear of the unit. You’ll need to set the following:

●SCSI ID number

●Termination

11