Yamaha CRW2100SX 2Termination

Setup Procedures

2Termination

Terminators prevent SCSI signals from being reflected off the last device in the chain. The SCSI terminator switch should be set to “ON” if your CRW2100SX drive is the last device on the SCSI chain. If it is not the last device on the chain, the TERMINATOR switch should be set to “OFF.”

Computer

Hard disk drive (unterminated)

CRW2100SX

SCSI card

Terminator ON

nBy factory default, the Terminator switch is set to “ON.”

Contents

Page COMPLIANCE INFORMATION STATEMENT Page Page English SAFETY PRECAUTIONS WARNING CAUTION ■About CD-R/RWdiscs ■Precautions for Transportation ■Copyrights ■WARRANTY Table of Contents Introduction Features of the CRW2100SX Drive High speed CD TEXT support Wide compatibility About Partial CAV (Constant Angular Velocity) Before Use System Requirements PC/AT-CompatibleComputer Operating System (OS) CD Writing Software Hard Drive Space Supported Discs Tools Phillips Screwdriver Front and Rear of Unit Front Panel Rear Panel Setup Flowchart Windows Users STEP Install the CD writing software STEP Start using the CRW2100SX 6 drive Macintosh Users Install the CD writing software Start using the CRW2100SX drive Setup Procedures Serial Number SCSI Settings 1SCSI ID number 2Termination Setting Up The CRW2100SX Drive Installing a SCSI Card Page do not power it up yet Connecting the Drive Page Page Page Verifying the Hardware Installation Macintosh Users Operation Loading a Disc Ejecting a Disc Ejecting a Disc in an Emergency Troubleshooting The disc tray does not come out The disc keeps being ejected The drive does not operate correctly The “Buffer Underrun” error message is displayed No sound is audible when playing back CD-DA(audio CD) discs Appendix Writing Modes Disc-at-Once(DAO) Track-at-Once(TAO) Session-at-Once(SAO) Packet Writing About the firmware Macintosh Users LED Indicator Messages CRW2100SX Specifications Page Page Index