Troubleshooting
Please also refer to the YAMAHA
●Make sure that the drive is properly connected to a “live” AC outlet using the supplied power cable. If necessary, reconnect the cable.
●Make sure that the front panel POWER switch is depressed. As long as the LED on the front panel lights up or blinks in green or orange, the drive is successfully turned on. There may be no hardware trouble (P. 28). If you cannot see the LED activity, consult your nearest Yamaha dealer for repair.
The computer does not start up.●Is the SCSI card installed correctly? Please read the documentation that came with your SCSI card for details.
The CRW2100SX drive is not recognized.●Is the drive’s power cable attached correctly, and does the drive power up? Also, is the SCSI cable connected correctly?
If the system has started up normally, you will be able to see the CRW2100SX drive and SCSI card listed in Control Panel System Device Manager tab. The drive will be listed as “Yamaha CRW2100S” when you
When you power up your computer, you can access the machine’s hardware SCSI BIOS settings before Windows is loaded. You can set your computer to recognize the SCSI card and CRW2100SX drive in the BIOS.
n Generally, the BIOS (Basic Input / Output System) is a small program that resides on a ROM chip on the computer’s motherboard as well as on some expansion cards. It checks the system and its devices (such as serial ports and hard disk controllers) before loading the operating system (OS).
●Are you using the correct SCSI driver
If the SCSI card has not been installed correctly under Windows 95/98/98 Second Edition/NT/2000, make sure that you have installed the most recent SCSI driver supplied by the SCSI card manufacturer.
For information about the latest version of driver, please contact the respective SCSI card manufacturer.
26