Yamaha CRW2100SX Operation, Loading a Disc, Ejecting a Disc

Operation

This section explains how to operate the CRW2100SX drive after you have installed it. You can load and eject a disc (as described below) only when the CRW2100SX is powered on.

Loading a Disc

12

1Open the tray by pressing the Eject button on the CRW2100SX drive’s front panel.

2Place the disc onto the tray with its label or printing facing upward.

3Press the Eject button to close the tray.

nDo not push or pull the tray using excessive force. Doing so can damage the drive or the disc. Instead, always use the Eject button to open or close the tray.

Ejecting a Disc

12

1Open the tray by pressing the Eject button on the CRW2100SX drive’s front panel.

2Remove the disc from the tray.

3Press the Eject button to close the tray.

nIt may not be possible to eject the disc tray while a disc is being read or in other situations, depending on the SCSI command.

nOnly remove the disc after the disc tray has opened fully. Otherwise, you risk damaging the drive or the disc.

24