120 CVP-103
BSelect the punch-in mode........................................................................
Select the desired punch-in mode with the fourth LCD button. Two
modes are available, as described below.
1ST KEY Recording begins as soon as the first key is played, after
Punch-in playback is started in step 7 (below).
PEDAL Recording begins as soon as the left pedal is pressed, after
Punch-in playback is started in step 7 (below).
When the PEDAL punch-in mode is
selected, the left pedal is automatically
assigned for this function only (the nor-
mal pedal function is canceled).
NSelect the punch-out mode....................................................................
Select the desired punch-out mode with the center LCD button. Two
modes are available, as described below.
REPLACE When recording is stopped, all data following the punch-out
point will be erased.
PCH.OUT When recording is stopped, all data following the punch-out
point will remain intact.
MStart playback and recording..............................................................
Press the [PLAY/STOP] or [PAUSE] button to start playback from
the current paused location.
To punch in (i.e., start recording) when the 1ST KEY mode is se-
lected, simply begin playing at the point from which you want to record.
To punch in (i.e., start recording) when the PEDAL mode is selected,
press the left pedal at the point from which you want to record.
When the PEDAL Punch-in mode is
selected, recording can be started di-
rectly by pressing the left pedal, without
first pressing the [PLAY/STOP] or
[PAUSE] button to start playback.
<Stop recording.................................................................................................
Press the [PLAY/STOP] button.
➔Recording stops. When the data has been written to disk, the
[REC] lamp goes out and the SONG PLAY display reappears.
When the PEDAL mode is selected,
recording can also be stopped by press-
ing the left pedal.
Song Recording
118