96 CVP-103
Adjusting the Tempo
The playback tempo of the song can be changed as desired. (See page
25.) The preset tempo for the selected song can be restored at any time
by simultaneously pressing the TEMPO [–] and [+] buttons.
Usually the tempo is indicated by numbers. However in case of the
free tempo software, “- - -” will appear in place of the tempo in the dis-
play, and the measure numbers shown in the display will not correspond
to the actual measure; this only serves as a reference as to how much of
the song has been played back. The increase or decrease of the tempo
based on the basic tempo is indicated by a percentage figure in the dis-
play when the tempo is changed (from -99 to +99 at maximum; the range
differs depending on the software).
The BEAT lamps (page 52) may not
flash during playback of free-tempo
software.
With some songs, the displayed meas-
ure numbers may not match those
marked on the score.
VVVVVEject the disk........................................................................................................
When you’ve finished with the currently loaded disk, simply press the
disk drive’s EJECT button to remove it.
The LCD display returns to the main display.
CAUTION
Never take out the disk while the DISK
IN USE lamp is lit or while a song is
being played back.
Volume Adjustment for Each Part
The volume of each part can be adjusted
in the MIXER display.
Adjusting the Level Balance of Song
Playback and the Keyboard Voices
Use the [ACMP/SONG VOLUME] control
(page 23) to adjust the volume.
When playing back a song recorded on
the CVP-109/107/105/103, the Auto
Accompaniment can be turned on by
pressing the [ACMP ON] button.
Song Playback
DISK IN USE
METRONOME RESET
TEMPO
94