32 CVP-103
XAdjust the volume of the main voice.
Use the data dial or [–] and [+] buttons to change the volume, or hold
down the VOLUME button to increase the volume.
Press the [–] and [+] buttons simultaneously to restore the basic setting.
■Setting the Volume of the Main Voice...........................................
You can use the VOLUME function in the KEYBOARD [RIGHT1]
page to change the volume of the main voice.
To adjust the overall keyboard volume,
use the KBD VOL function in the main
display (page 23) instead.
ZPress the VOLUME button.
➔The VOLUME function is highlighted.
VOLUME
• Range: 0 — 127
• Basic setting: 127
■Setting the Octave of the Main Voice...........................................
The OCTAVE function in the KEYBOARD [RIGHT1] display lets
you adjust the pitch of the main voice up or down by one or two octaves.
Press the OCTAVE button.
➔The value changes each time you press the button.
OCTAVE
• Settings: –2 (2 octaves lower)
–1 (1 octave lower)
0 (no octave shift)
+1 (1 octave higher)
+2 (2 octaves higher)
• Basic setting: 0
■Setting the Stereo Position of the Main Voice ....................
The PAN function in the KEYBOARD [RIGHT1] display lets you
adjust the stereo position of the main voice.
ZPress the PAN button.
➔The PAN function is highlighted.
PAN
• Settings: L — — R
• Basic setting: (center)
Selecting Voices
XAdjust the stereo position.
Use the data dial or [–] and [+] buttons to change the stereo position,
or hold down the PAN button to move the position to the right.
Press the [–] and [+] buttons simultaneously to restore the basic set-
ting.
Some voices have octave settings that
are selected automatically when the
voice is selected. (Such settings are not
displayed by the OCTAVE function.) You
can prevent the octave setting from
changing when a voice is selected by
setting the VOICE SETTING function
(page 137) to MANUAL.
30