Yamaha CVP-103, CVP-103M Making Settings in the INITIAL EDIT Display

131
CVP-103
ZSelect the track to be edited.............................................................
Select the track whose parameters you wish to change by pressing
the TRACK < or > button. If TOTAL is selected, any changes will
affect the entire song rather than an individual track.
XSelect the parameters to be changed.....................................
Select the parameters to be changed by pressing the SELECT ▼ or
▲ button.
The following parameters can be changed in the INITIAL EDIT
display. Refer to the indicated page for details on each parameter.
Parameters which can be changed with Initial Edit:
● When track 1 — 16 is selected:
• VOLUME (See page 32.)
• VOICE (See page 29.)
• PAN (See page 32.)
• REVERB DEPTH (See page 43.)
• CHORUS DEPTH (See page 45.)
• EFFECT DEPTH (See page 48.)
● When TOTAL is selected:
• TEMPO (See page 25.)
• Overall REVERB DEPTH (See page 42.)
• REVERB TYPE (See page 42.)
• CHORUS TYPE (See page 44.)
• EFFECT TYPE (See page 47.)
• The Program Change Number (PRG#),
Bank LSB (BKL), and Bank MSB (BKM)
parameters, which are used to select
voices via MIDI, are displayed when
VOICE is selected.
Making Settings in the INITIAL EDIT Display
129
Other Record Edit Functions
The current parameter value for the
selected track.
The parameter to
be changed.
The selected track
is highlighted.
CChange the settings...................................................................................
Use the data dial or [–] and [+] buttons to change the settings. You
can instantly check the effect of the changes, since the settings can be
changed during playback.
• If TOTAL is selected and the value of
the reverb depth is changed, the new
setting will also affect the keyboard
sound.
• The voices of the tracks to which Auto
Accompaniment, rhythm and/or Har-
mony data have been recorded, can
also be changed.
• The data may not be played back
accurately if you use the [REW] button
while editing the data.