Yamaha CVP-103, CVP-103M Voice Effects

47
CVP-103
■Changing the Effect Type.........................................................................
You can change the effect type selection in the EFFECT page. Select
an effect type using the TYPE ▲ and ▼ buttons, or highlight the TYPE
function and use the data dial or the [–] and [+] buttons.
Effect Type
• Settings: See table on page 163.
• Basic setting: Depends on voice.
To reset the effect type to its basic setting, simultaneously press the
EFFECT TYPE ▲ and ▼ buttons or the [–] and [+] buttons.
➔The selected effect type is highlighted.
Because the basic setting of the effect type depends on the voice, the
effect type may change automatically when you select a different voice.
• The effect type selection affects all
keyboard parts. Different settings
cannot be made for each part.
• When the basic setting of the [EF-
FECT] button is ON for two or three
voices selected in Dual and/or Split
mode, the Clavinova will automatically
select the most appropriate effect type
and set the effect depth (page 48) for
each part to an appropriate level.
• Depending on the selected voice, the
depth of the effect may sound stronger
or weaker, even though the same
effect type is selected.
• If both the [EFFECT] and [REVERB]
buttons are turned on, both effects will
be applied.
Voice Effects
XUse the PAGE [<] and [>] buttons to switch between the EF-
FECT and EFFECT DEPTH pages.
➔The value displayed by the VARIATION function switches be-
tween OFF and ON, and the effect changes.
The way in which the effect changes depends on the effect type (see
the table on page 163). Also, because the basic setting of the VARIA-
TION function depends on the voice, the setting of this function may
change automatically when you select a different voice.
■Varying the Effect.............................................................................................
Each of the Clavinova’s effect types has a variation that can be se-
lected using the VARIATION function in the EFFECT page. To vary the
effect produced by the selected effect type, press the LCD button under
VARIATION.
VARIATION function
• Settings: OFF, ON
• Basic setting: Depends on voice.
45