Yamaha CVP-103, CVP-103M NSelect the part you want to record................................................, MSelect the voice for the part..................................................................

76 CVP-103
➔The part number is highlighted. If you have selected a part other
than R1 or R2, the “Clear part?” message will be displayed.
The R1 part is initially selected and set to
record.
Any part you select can be set to record by using the rightmost LCD
button to select REC after selecting the part.
R1 Rhythm 1
R2 Rhythm 2
Bs Bass
C1 Chord 1
C2 Chord 2
Pd Pad
P1 Phrase 1
P2 Phrase 2
Recording part
• Only one part can be set to record.
• All other parts will be set to PLAY (the
part number is surrounded by a box) or
OFF (only the part number is dis-
played).
Part containing no dataPlayback part
OFF
Clear part?
• If the source style is a preset style or a
style loaded from an optional Style File
disk, parts other than R1 and R2 must
be cleared before they can be re-
corded.
• The “Clear part?” message will not be
displayed if the selected part does not
contain any data.
➾Press OK to clear the part and continue, or CANCEL to abort.
The preset voice for the part being re-
corded is initially selected.
At this point you can also select the voice you want to record the part
with. Select the voice as you would the main keyboard voice (see page
29).
Part Voices that can be used
R1 Any drum or SFX kit in PERCUSSION group
R2 Any
Others Any except a drum kit or SFX kit
Creating Your Own Styles
74
NSelect the part you want to record................................................
Use the PART LCD button, the data dial, or [–] and [+] buttons to
select the part you want to record.
MSelect the voice for the part..................................................................