Yamaha CVP-505, CVP-501, CVP-503 Using Headphones

16 CVP-509/505/503/501 Owner’s Manual
Starting Up
CVP-501
First pull the music rest up and toward yourself as far as it will go, flip down the two
metal supports at the left and right on the rear of the music rest, then lower the music
rest so that it rests on the metal supports.
To lower the music rest, first pull the music rest toward yourself as far as it will go,
raise the two metal supports, then gently lower the music rest backward until it is all
the way down.
Connect a pair of headphones to one of the [PHONES] jacks located on the bottom
left of the instrument.
Two sets of standard stereo headphones can be connected. (If you are using only one
pair of headphones, you can plug them into either of these jacks.).
A headphone hanger is included in the instrument package so that you can hang the
headphones on the instrument. Install the headphone hanger using included two
screws (4 x 10mm) as shown in the figure.
CAUTION
Do not try to use the music rest
in a half-raised position.
Using Headphones
CAUTION
Do not listen with the head-
phones at high volume for long
periods of time. Doing so may
cause hearing loss.
Using the Headphone Hanger
MIN MAX
INPUT MIC. MIC.LINE PHONES
VOLUME LINE IN
CVP-509/505/503
CVP-501
Standard phone plug
CAUTION
Do not hang anything other than
the headphones on the hanger.
Otherwise, the instrument or the
hanger may be damaged.
CVP-509/505 CVP-503/501