CVP-509/505/503/501 Owner’s Manual 27
Starting Up
The instructions that follow show you how to enter characters for naming your files/
folders, inputting keywords, etc. Entering characters should be done in the display
shown below.
1Change the type of character by pressing the [1 ▲] button.
If you select a language other than Japanese as the Language (page 17), the
following different types of characters are available:
• CASE capital letters, numbers, marks
• case lowercase letters, numbers, marks
If you select Japanese as the Language (page 17), the following different types
of characters and sizes can be entered:
Closing the current folder and calling up the next highest level
folder
In the PRESET display, several data (files) are contained together in a folder.
You can also organize your original data in the USER/USB display by creat-
ing several new folders (page 69).
To close the current folder and call up the next highest level folder, press the
[8 ▲] (UP) button.
Example of the PRESET Voice Selection display
The PRESET Voice files are categorized and contained in appropriate folders.
This display shows the Voice
files in a folder.
The next highest level — in this case,
folder — is shown. Each folder
shown in this display contains appro-
priately categorized Voices.
Entering Characters
Several different characters are
assigned to each button, and the
characters change each time you
press the button.
14
3
2
NOTE
Depending on the display for charac-
ter entry you are working in, some
types of characters cannot be
entered.”