90 CVP-509/505/503/501 Owner’s Manual
Mixing Console – Editing the Volume and Tonal Balance –
8
You can change the Voice and adjust panning and volume for each keyboard part,
Style channel or Song channel.
1Same operation as in the “Basic Procedure” on page 88. In step
2, select VOL/VOICE tab.
2Press the [C] (or [H]) button to select the VOICE parameter.
3Press one of the [1 ▲▼] – [8 ▲▼] buttons to select the desired
part.
The Voice Selection display appears.
4Select a Voice.
Press one of the Voice category selection buttons on the panel, then select a
Voice by using the [A] – [J] buttons (page 37).
5Press the [EXIT] button to return to the MIXING CONSOLE
display.
6Save your settings (step 5 on page 89).
Changing Voices and Adjusting Panning/Volume for Each Part

Changing the Voice for each part

3
NOTE
• Some Voices (such as Organ
Flutes) cannot be selected for Style
channels.
• The RHY2 channel in the STYLE
PART display can only be assigned
Drum kit Voices and SFX kit
Voices.
• When playing GM Song data, chan-
nel 10 can only be used for a Drum
kit Voice.