10 Chapter 2—Console Window

PDelay parameter

This parameter is used to set the delay time of the Delay function. Delay times can be set by dragging.

QChannel number

This is the channel number.

RAUX section

These controls are used to set the levels of the Aux Sends. To set an Aux Send level, drag its bar or click a point along the length of the bar. To turn an Aux Send on or off, click its number.

The following table shows how the Aux Send controls appear depending on the Aux Send On/Off and Pre/Post settings. Aux Sends can be set to pre-fader or post-fader on the Selected Channel window (see “AUX SEND section” on page 15).

Aux Send status

Appearance

 

 

 

 

 

On or off but no level set

Dark blue bar

 

 

 

 

 

 

Off, pre-fader

Green bar outline displays level

 

 

 

 

 

 

On, pre-fader

Green bar displays level

 

 

 

 

 

 

Off, post-fader

Orange bar outline displays level

 

 

 

 

 

 

On, post-fader

Orange bar displays level

 

 

 

 

 

 

 

 

 

SPan/Aux Send display

This display shows the stereo or surround pan position or, while setting an Aux Send, the Aux Send level in dB.

TPAN control

This control is used to set the Input Channel’s stereo or surround pan position. When the PAN CONTROL in the Master Section is set to “STEREO,” the Pan control appears as a rotary control, and when set to “SURR,” the control appears as dot on a pan graph. The surround pan position can be set by dragging the dot. If you click on the pan graph while holding down the Shift key, the pan immediately jumps to the new position.

ULFE control

When 5.1 or 6.1 Surround mode is selected, this control is used to set the surround LFE Channel level. It appears when the PAN CONTROL in the Master Section is set to “SURR.” To set the LFE level, drag the end of its bar or click a point along the length of the bar.

VAUTO button

This button displays the Automix status of the Input Channel.

WSELECT button

This button is used to select the Input Channel.

XSOLO button

This button solos the Input Channel. It appears orange while the channel is soloed.

YON button

This button turns the Input Channel on and off. It appears orange while the channel is on.

ZShort channel name

This is the channel’s short name. To edit the name, click it and type.

aChannel fader

This is the Input Channel’s fader.

bChannel meter

This meter displays the signal level of the Input Channel.

Studio Manager for DM1000—Owner’s Manual