30 Chapter
8 Effect Editor Window
The Effect Editor window allows you to edit the internal effects processors. To open the Effect Editor window, choose Effect Editor from the Windows menu.
1 | 2 | C 4 5 |
6 | 7 8 |
AEffects processor select
These buttons are used to select the internal effects processors.
BEffect select section
The EFFECT NAME, TYPE, and IN/OUT are the name, type and I/O configuration of the effect recalled to the currently selected effects processor. To edit the EFFECT NAME, click it and type. The LIBRARY button opens the Effects Library window.
CMeters
These are output meters for the currently selected effects processor.
DIN button
This button is used to set the metering position to the effects processor’s inputs.
EOUT button
This button is used to set the metering position to the effects processor’s outputs.
FEffect parameter section
This section contains the various effects controls, buttons, and displays. Its layout depends on the selected effect type.
GMIX BALANCE control
This control is used to adjust the balance between the wet and dry signals. When set to 0, only the dry signal is heard. When set to 100, only the wet signal is heard.
HBYPASS button
This button is used to bypass the currently selected effects processor.
Studio Manager for