Input Channels | 9 |
Input Channels
1
B
C D 5 6 7 8 9 J K
L
M
N
O
P
Q
R
S
T
V 
U
W
X
Y
Z
a
b
ASOURCE parameter
This parameter is used to select an Input source. To select an Input source, click the parameter and choose from the list that appears.
BRouting buttons
These buttons are used to route the Input Channel to the Bus Outs.
CSTEREO button
This button is used to route the Input Channel’s signal to the Stereo Out.
DDIRECT button
This button turns on and off the Input Channel’s routing to its Direct Out.
EDirect Out parameter
This parameter is used to select the Direct Out destination. To select a destination, click the parameter and choose from the list that appears.
FPHASE button
This button is used to reverse the signal phase of the channel.
GINSERT button
This button is used to turn on and off the Input Channel’s Insert.
HGATE button
This button is used to turn on and off the Input Channel’s Gate.
IGate open/close indicators
These indicators display whether the Gate is open (green) or closed (red).
JGate threshold
This displays the Gate Threshold, which can be set by dragging.
KCOMP button
This button is used to turn on and off the Input Channel’s Com- pressor.
LCompressor curve
This display shows the Compressor’s curve.
MEQ button
This button is used to turn on and off the Input Channel’s EQ.
NEQ curve
This display shows the Equalizer’s curve, which can be set by dragging.
ODELAY button
This button is used to turn on and off the Input Channel’s Delay function.
Studio Manager for