Yamaha DM 2000 Connecting to the DM2000

Connecting to the DM2000 12

Studio Manager—Owner’s Manual

The OMS studio setup is complete.

1Start OMS Setup and choose “New Setup” from the File menu.

The OMS Driver Search dialog appears.

2Deselect “Modem” and “Printer,” and click Search.

If successful, the USB-MIDI device is displayed in the OMS driver setting dialog.

3Click OK to search for ports.

Port 1, Port 2... appears in the dialog.

4Select the appropriate ports and click OK to store the setting.

Refer to “OMS_2.3_Mac.pdf” supplied with OMS for more information.

Connecting to the DM2000

Select the port and ID on the DM2000 that you want to use for communication with Studio

Manager. To select a port and ID, locate the MIDI/TO HOST Setup page of the DM2000

and make the selections as required. If you are using the serial port to connect to the

DM2000, select the type that matches your computer’s serial port. You can select either

PC-2 or Mac. See the DM2000 documentation for more information.

Note: After the OMS Studio Setup above has been completed, your computer will recognize

only the DM2000 as a MIDI instrument. If you use another MIDI instrument in addition to

the DM2000,or you add a second DM2000 to the existing system, you should create an original

Studio Setup ﬁle. Refer to the on-line manual supplied with OMS for more information.

Note: Depending on your Mac and Mac OS version, the included OMS Studio Setup ﬁle may

not function (i.e., MIDI data cannot be transmitted/received even though the settings have

been made.)

In this case, connect your Mac to the DM2000 via USB and follow the procedure below to rec-

reate the setup ﬁle.

Note: Turn off the DM2000 and shut down the computer if you connecting using the serial or

MIDI ports

USB cable USB port

Serial cable Serial port

DM2000 Rear Panel

Mac or PC

MIDI Interface

MIDI cables