Master Section 18
Studio Manager—Owner’s Manual
Master Section
The Master Section is situated on the right side of the Console window.
A ONLINE/OFFLINE status indicator
This indicator shows whether Studio Manager is online
or offline. See “Using Studio Manager Online & Offline”
on page 14 for more information.
B Meters (Stereo shown)
These meters display the output level of the Stereo Out
when the PAN CONTROL is set to “STEREO,” and the
Bus Outs when the PAN CONTROL is set to “SURR.” See
page 19 for information on how these meters appear in
Surround modes 3-1 and 5.1.
C LAYER buttons
These buttons are used to select the Layers. The channels
of the selected Layer are displayed in the Channel Section
of the Console window. Only one Layer can be selected at
a time.
D PAN CONTROL
These two buttons are used to select either “STEREO”
(Stereo mode) or “SURR” (Surround mode). The Pan
control on the Input Channels is a rotary control when
“STEREO” is selected, and a dot on a pan graph when
“SURR” is selected.
E AUTO button
This button is not used in Version 1.0 of Studio Manager
for DM2000.
F SELECT button
This button is used to select the Stereo Out. Note that the
Stereo Out cannot be selected if a Remote Layer is
selected.
G ON button
This button turns the Stereo Out on and off. It is colored
orange when the Stereo Out is turned on.
H Channel Fader
This control is used to set the level of the Stereo Out.
1
2
3
5
6
7
8
4