Software Installation for Windows
6
Studio Manager—Owner’s Manual
8
Click Next.
After installation is complete, the window appears as shown below.
9
Click Finish.
The driver is installed.
Installing on a Windows 2000 system 1
Turn on your PC and use the “Administrator” account to log into Windows
2000.
2
Select My Computer, Control Panel, System, Hardware, Driver Signing, File
Signature Verification, select “Ignore -Install all files, regardless of file signa-
ture,” and click OK.
3
Insert the included CD-ROM disc into your CD-ROM or DVD-ROM drive.
4
Turn off the DM2000 and use a USB cable to connect the USB port of the
computer (or the USB hub) to the TO HOST USB port of the DM2000.
5
Turn on the DM2000.
The Add New Hardware Wizard window appears.
6
Click Next.
7
Select “Search for a suitable driver for my device. (Recommended).” Click
Next.
8
Select “CD-ROM drives” only, in the window that appears. Click Next.
When the installation is complete the message, “Completing the Found New Hardware
Wizard” is displayed.
9
Click Finish.
10
Restart the computer.
The driver is installed.
Note: It may take up to ten seconds for this window to appear.
Note: You may be asked to insert your Windows CD-ROM so that the driver can be located.
Specify the “USBdrv2k_” folder of the CD-ROM drive (such as D:\USBdrv2k_\) and continue
the installation.
Note: It may take up to ten seconds for this window to appear.
Windows 98 Windows Me