27 Chapter 3—Selected Channel Window
Studio Manager—Owner’s Manual
Stereo Out
The Selected Channel window for the Stereo Out is shown below. Note that this window
cannot be opened from the Windows menu if a Remote Layer is selected.
A CHANNEL SELECT section
Channels can be selected by clicking the Channel ID and choosing from the list that
appears, or by clicking the left and right Channel Select buttons. This section also displays
the Long Channel name, which can be edited. To edit the name, click it and type. The
LIBRARY button is not used in Version 1.0 of Studio Manager for DM2000.
B EQUALIZER section
This section contains the controls and display graph for the Stereo Out’s 4-band Parametric
Equalizer and is identical to the Equalizer section of the Input Channels. See page 23.
C DELAY section
This section contains the controls for the Stereo Out’s Delay function. The rotary control is
used to set the delay time, and the ON button turns the Delay function on and off.
D Stereo Out Pan/Level section
This section contains the Pan control, Channel ON button, and the Channel Fader for the
Stereo Out. The AUTO button is not used in Version 1.0 of Studio Manager for DM2000.
E COMPRESSOR section
This section contains the controls and display graph for the Stereo Out’s Compressor and is
identical to the Compressor section of the Input Channels except that there is no LINK but-
ton. See page 23.
F INSERT section
This section contains the parameters for the Stereo Out’s Insert. The INSERT button turns
the Insert on and off. The OUT and IN parameters are used to select the channel’s Insert
23
7
1
56
4