Yamaha DM 2000 Master Layer Channels

Master Layer Channels 20

Studio Manager—Owner’s Manual

Master Layer Channels

When the Master Layer is selected in the Master Section, the Bus Outs, Aux Sends, and

Matrix Sends can be selected. A Bus Out is shown below. Aux Sends and Matrix Sends

appear the same except that they do not have a STEREO button.

A STEREO button (Bus Out only)

This button is used to route the Bus Out to the Stereo Out.

B INSERT button

This button is used to turn on and off the Bus Out’s Insert.

C COMP button

This button is used to turn on and off the Bus Out’s Compressor.

D Compressor curve display

This display shows the Compressor’s curve.

E EQ button

This button is used to turn on and off the Bus Out’s 4-band Para-

metric Equalizer.

F EQ curve display

This display shows the Equalizer’s curve, which can be set by

dragging.

G DELAY button

This button is used to turn on and off the Bus Out’s Delay func-

tion.

H Delay time

This parameter is used to set the delay time of the Delay func-

tion. Delay times can be set by dragging.

I Channel number

Displays the Channel number of the channel.

J AUTO button

This button is not used in Version 1.0 of Studio Manager for

DM2000.

K SELECT button

This button is used to select the Bus Out.

L SOLO button

This button solos the Bus Out and is colored orange when the

channel is soloed.

M ON button

This button turns the Bus Out on and off. It is colored orange

when the channel is turned on.

N Short Channel name

This is the channel’s Short Channel name, which can be edited.

To edit the name, click it and type.

O Channel Fader

This control is used to set the level of the Bus Out.

P Channel Meter

This meter displays the signal level of the Bus Out.