Menu structure
Input signal |
|
| Menu Item | Adjustment range |
Video/Component, | SHARPNESS TYPE | OFF/L/ML/MH/H | ||
RGB TV | Use this parameter to change the filtering characteristics of the circuitry used to sharpen edges |
| ||
| in the projected image. |
| ||
Video/Component, | SHARPNESS GAIN | 0 to 16 to 63 | ||
RGB TV | Adjusts the clearness of the image edges. The higher value creates clearer edges. The lower |
| ||
| value creates a softer image with less noise element. |
| ||
Video/Component, | COLOR BALANCE |
|
| STANDARD/RGB/ |
| ||||
RGB TV, RGB PC | The default setting displays a good balance of colors, which you cannot change. For RGB, this | RGBYCM | ||
| parameter adjusts the color balance and gain for the three primary colors R (red), G (green), and |
| ||
| B (Blue). The intermediate colors Y (yellow), C (cyan), and M (magenta) are set automatically |
| ||
| based on the RGB and color temperature settings. From the RGB submenu, press the RESET |
| ||
| key on the remote control to automatically adjust the RGB setting and based on the color gain |
| ||
| and temperature you have just set. For RGBYCM, you should set the color balance and gain for |
| ||
| each color separately. From the RGBYCM submenu, press the RESET key on the remote |
| ||
| control to automatically adjust the RGB or YCM tone and based on the color gain and |
| ||
| temperature you have just set. Refer to the color chart below for further help in adjusting |
| ||
| parameters. |
| ||
| You can change the background color to black by pressing the key when setting the COLOR |
| ||
| COORDINATE. |
| ||
| XYZ color system color chart |
| ||
| Y |
|
Green
Yellow
Red
Cyan
Magenta
Blue
|
|
| X |
|
|
|
| ||
Component, | LEVEL ADJUSTMENT |
|
| |
| ||||
RGB TV, RGB PC | Adjusts gain and offset for all parameters (Y, CB, CR/R, G, B) of component and RGB signals. |
| ||
| (except DVI input) |
| ||
Video/Component, | IRIS | STANDARD/CINEMA | ||
RGB TV, RGB PC | IRIS set this parameter to STANDARD for viewing bright images on a large screen. Set it to |
| ||
| CINEMA if you want to give priority to the deep blacks and high contrast important to home |
| ||
| theatre viewing. |
|