Yamaha DPX-1000 <SIGNAL

Menu structure

■2 <SIGNAL> ...... You cannot adjust the parameters below if the unit is not receiving an input signal.

Input signal		Menu Item	Selections
Video/Component,	DISPLAY ASPECT		AUTO/NORMAL/
RGB TV, RGB PC	Sets the aspect ratio to use when projecting an image for a given input signal. Under AUTO		SQUEEZE/SMART
	mode, the unit will automatically switch to the most suitable mode for display. NORMAL		ZOOM/ZOOM/
	(THROUGH) mode projects the image as is without an alteration to the signal. SQUEEZE		SUBTITLE ZOOM
	displays horizontally compressed images in a normal non-compressed manner. ZOOM projects		(SUBTITLE AREA,
	the image scaled up by a given ratio. SMART ZOOM expands a 4:3 image to 16:9 size.		V SCROLL)/THROUGH/
	SUBTITLE ZOOM displays subtitles. THROUGH SQUEEZE displays an image with the width		THROUGH SQUEEZE
	scaled up. The availability of these options depends on the type of input signal.
	Depending on the state of the input source, it may not be possible for the unit to automatically
	select the optimal display mode. In this case, please select an appropriate mode manually.
	SUBTITLE ZOOM contains the following parameter settings:
	SUBTITLE AREA: Adjusts the subtitle display area		0 to 3 to 10
	V SCROLL: Adjusts the vertical position of subtitles		–10 to 4 to +10
Video(NTSC)	3D Y/C SEPARATION		OFF/ON
	Suppresses the rainbow like color crossing and annoying dots in the image received from video
	input. This choice is only available for NTSC format signals from composite inputs.
Video/Component,	NOISE REDUCTION		OFF/1/2/3
RGB TV	Uses digital processing to eliminate noise in the luminance and color signals in sources with a
	comparatively large amount of noise, producing a more vivid image. Use where warranted by
	source quality.
Video	VIDEO TYPE		DVD/VCR
	To ensure synchronization, select VCR when using analog videotape as a video input source.
	Select DVD for other sources.
Video/Component,	PROGRESSIVE MODE		AUTO/VIDEO
RGB TV	Switches the mode of interlace/progressive (I/P) conversion for the built in Faroudja function.
	AUTO distinguishes film source automatically and projects it progressively at 60 frames per
	second. Video turns the distinction function off. Both of these modes use the DCDi function.
	(Only for SDTV interlaced signals)

Video/Component

COLOR SPACE CONVERSION

Selects color space coefficients for SDTV BT.601 and HDTV BT.709 type signals. In the AUTO mode, the unit will automatically select an appropriate mode based on the resolution of the signal.

AUTO/SDTV/HDTV

Video/Component,

RGB TV

Component, RGB TV

SETUP LEVEL (SDTV)

Compensates for the differences in blackness levels in normal image signals. It sets the level for signals equal to the pedestal level at 0%, and those for signals with high levels of blackness at 7.5%.

SETUP LEVEL (HDTV)

Compensates for the differences in blackness levels in HDTV signals. It sets the level for signals equal to the pedestal level at 0%, and those for signals with high levels of blackness at 7.5%.

IMAGE SIGNAL

100

0%/7.5%

		PEDESTAL LEVEL	BLACK LEVEL
RGB TV	SIGNAL LEVEL		16–235/0–255
	The function to change the range of the digital signal level of the input image.
	Use 16—235 for a standard STB (Set Top Box) connection, or use 0—255 for a PC compatible
	connection. (Only for DVI Signals)
*RGB PC	SYNC ADJUSTMENT		–128 to 0 to +127
	Regulates flickering, noise, and disorder in the projection image. (* except DVI input)
*RGB PC	TRACKING		0 to 16 to 31
	Regulates vertical striping in the image. (* except DVI input)
*RGB PC	HORIZ. DISPLAY POSITION		–50 to 0 to +50
	Adjusts the horizontal positioning of the projection image. (* except DVI input)
*RGB PC	VERT. DISPLAY POSITION		–50 to 0 to +50
	Adjusts the vertical position of the projection image. (* except DVI input)
Video/Component,	SIGNAL STATUS


RGB TV, RGB PC	Displays the resolution of the input signal, and synchronization information for RGB signals.

E-19

English