Part Names and Functions
■Connections
AC inlet
Plug in the supplied power cord here.
Rear remote control sensor
q |
|
|
|
|
|
| w | e | r |
|
|
|
|
|
| OUT |
| IN |
|
DVI |
|
|
|
|
|
| REMOTE | TRIGGER OUT | |
INPUT B |
|
|
| INPUT A |
|
|
|
|
|
RGB/YPBPR/YCBCR | D4 VIDEO | G/Y | B/PB/CBR/PR/CR | HD/SYNC | VD |
| VIDEO | ||
1 | 2 | 3 | 4 | 5 | 6 | 7 |
| 8 | 0 9 |
INTRODUCTION
1INPUT B (D-Sub 15 pin)
This is the input connector for signals (RGB/YPBPR/YCBCR) from a component video or RGB source. Use a
2D4 VIDEO (D connector)
This connector receives video signals from the D connector of other A/V components. It is compatible with the
3—7 INPUT A (BNC jacks)
These are input jacks for signals from component video or RGB sources. Component signals from A/V equipment should be connected to ports
9VIDEO (Pin jack)
This jack receives composite signals from jacks of other A/V components. Use a video pin cable when connecting other components to the
0AC inlet
qDVI (DVI jack)
This jack receives DVI signals from computer equipment or DVI signals from A/V equipments.
wREMOTE IN/OUT jack
Connect the remote control to the IN jack when using it through a cable. Codes input through the IN jack will be output directly through the OUT jack.
eRS-232C (D-sub 9 pin)
This jack is used for factory testing.
3G/Y (G, or luminance signal)
4B/PB/CB (B, or color difference signal)
5R/PR/CR (R, or color difference signal)
6HD/SYNC (horizontal sync signal, composite sync signal)
7VD (vertical sync signal)
8S-VIDEO (Mini DIN jack)
This jack receives S VIDEO signals from the
rTRIGGER OUT
This jack outputs control signals to external components. A potential of 12V/Maximum 200 mA is provided when the
English