6Projection
Checking installation and connections
◆Pre-operation check
Prior to projection, adjust settings to suit the location of the main unit and screen, and the input signal you are using.
However, there is usually no need to adjust any settings if you have not changed the installation location or components since the last time you used this unit. Check settings and connections only when the unit does not appear to project images correctly.
Prior to projection, check that the main unit and screen are correctly installed, and that source components are connected correctly.
Main unit
Is the screen installed correctly? | Image source component | |
“Setting up the projector and screen” | ||
| ||
☞ page 48 |
|
Is the main unit power turned on?
Are the components connected correctly? “Connecting to AV components”
☞ page 46
Is the source component power turned on?
To project images, carry out the following procedure.
Check installation and connections
Select an image for projection and image adjustment
Turn on the projector power.
Begin playback of the source image for adjustment.
Select a projection image.
(Select an input signal and projection image aspect.)
Adjust focus and vertical/ horizontal positioning.
Projection preparations complete
For an explanation of detailed settings, see “Menu”. ☞ page 22 - 40
12