1Getting started

Inappropriate places for installation

If this unit is not correctly installed in an appropriate place, it may cause fire or failure, or damage the unit itself. Carefully choose the place to install this unit by avoiding the places listed below.

1.Places where the temperature and humidity vary greatly

Do not install this unit in a place where the temperature and humidity become extremely high or the temperature becomes extremely low.

This unit must be used within a temperature range of 5—35°C.

2.Places without adequate ventilation

Install this unit with at least 30 cm (1 feet) of ventilation space on the top, right and left, and back.

Do not cover the ventilation slots of this unit. Covering the slots will obstruct heat dissipation.

Install this unit on the firm surface.

Do not cover this unit with a tablecloth, etc.

Make sure there is nothing to get sucked into the ventilation slots so that the temperature of this unit does not become too high.

If you are going to install the unit in a rack, be sure to leave space for ventilation to prevent exhaust overheating the unit.

3.Places where it gets dusty

If the filter is blocked with dust, the temperature of this unit may become too high.

4.Places with too much vibration or impact

Vibration and impact can damage parts of this unit.

5.Places where this unit gets exposed to water or high humidity

If this unit is exposed to water or high humidity, it may cause a fire or electrical shock.

6.Unstable places

If this unit is installed on an unstable or an inclined tabletop, it may fall and cause damage to the unit or personal injury.

7.In close proximity to a Radio or Stereo

The unit may interfere with reception if placed in close proximity to a radio or television receiver.

Warning

To ensure vivid, high contrast images, make sure that no light other than the projector light falls directly on the screen.

Accessory check

Please check that all accessories listed here are included in your package.

 

• Remote control

• Batteries (AA, UM-3 or R6)

• Power cable

Trigger-out DC plug

 

 

 

(For USA only)

AUTO

V. POS

ZOOM

FOCUS

IRIS SETTING PATT

ESCAPEMENU

ASPECT

 

INPUT

RESET

 

HIDE

STILL

 

LIGHT

S VIDEO

A

HDMI

VIDEO

B

D4

 

INPUT

 

 

MEMORY

 

1

2

3

4

5

6

• Pin/BNC adapters

• Lens cap

2