Adjusting the image

Carry out the following adjustments to obtain optimal projection conditions.

◆Using the test pattern to adjust the projection image – PATT button

The DPX-1100 is equipped with three test patterns, the crosshatch pattern necessary for focus and keystone adjustment, and the grayscale and color bar patterns necessary for adjusting image quality.

AUTO

V. POS ZOOM FOCUS

IRIS

SETTING PATT

PATT

 

 

button

ESCAPE

MENU

 

 

STANDBY/ON

 

PATTERN button

 

 

ESCAPE

MENU

 

PATTERN

 

SETTING

1.Press the PATT button on the remote control, or the PATTERN button on the main unit.

2.Press the + or - buttons to select the necessary pattern.

3.To exit from the test display, press the PATT or PATTERN buttons.

Crosshatch pattern

Grayscale pattern

Color bar pattern

ASPECT

INPUT

LAMP COVER TEMP FAN

◆Adjusting the vertical position – V.POS button

If the center of the screen is not in line with the center of the lens of the DPX-1100, use the V.POS button to adjust the position of the image up or down. You can adjust the image to a maximum of half of the height of the projection screen.

AUTO

V.POS

V. POS

ZOOM

FOCUS

button

IRIS

SETTING

PATT

 

ESCAPE

 

MENU

STANDBY/ON

ESCAPE button

ESCAPE

MENU SETTING

 

button

PATTERN

SETTING

1.Press the V.POS button on the remote control, or press the SETTING button on the main unit repeatedly to select [Lens Shift] from the display menu.

2.Press the h or g button to move the projected image to a suitable place.

3.To exit from the adjustment mode, press the V.POS or ESCAPE buttons.

Lens Shift

ASPECT

INPUT

LAMP COVER TEMP FAN

20